Skip to content
Engineering Trends, Insights & Articles

News

Hot-dip Galvanized Steel for Data Centres Market - Global Forecast to 2036 | AI Data Center Growth and Liquid Cooling Propel an 11.5% CAGR Toward USD 14.40 Billion

ENEngineering News

Boost ROI with pre-engineered kits, post-fabrication galvanizing, low-emission steel and traceable sourcing for AI campuses, liquid cooling and outdoor plants.

Dublin, Nov. 16, 2026 (GLOBE NEWSWIRE) -- "Hot-dip Galvanized Steel for Data Centres Market - Global Forecast to 2036" has been added to ResearchAndMarkets.com's offering.

The global hot-dip galvanized steel for data centres market was valued at USD 4.12 billion in 2025 and is estimated to reach USD 4.85 billion in 2026. With a projected CAGR of 11.5% during 2026-2036, the market is forecast to achieve USD 14.40 billion by 2036. Growth is being driven by AI data center construction, higher cabling density, liquid cooling adoption, expanding outdoor plant infrastructure, and demand for durable, maintenance-free steel components.

The report evaluates galvanized structural sections and plate, cable tray, ladder and wire basket systems, strut and channel framing, roof deck and purlins, raised floor pedestals and stringers, outdoor enclosures and containment, fasteners, and fittings. It focuses exclusively on galvanized steel articles and excludes stainless steel, aluminum containment, painted or organic-coated steel, concrete, non-galvanized steel, ductwork, and installed equipment.

Market dynamics and regulatory environment

Large AI campus developments are increasing demand for hot-dip galvanized steel because material requirements rise with building floor area, outdoor equipment footprints, and cabling density. Steel is often purchased and coated twelve to twenty-four months before data center fit-out, making early supply-chain planning essential.

Liquid cooling is also influencing coating specifications. Water-bearing infrastructure introduces condensation and leak exposure into data halls, increasing the need for corrosion-resistant support systems. Recoating steel inside an operating facility is generally impractical, while longer building design lives favor heavier zinc coatings that reduce maintenance requirements.

Coating standards include ISO 1461 for fabricated articles, ASTM A123 for steel products, and ASTM A153 for hardware. These standards establish coating mass and thickness requirements, shifting competition toward galvanizing bath dimensions, production throughput, quality, logistics, and lead times.

Trade and carbon policies are reshaping procurement. Under U.S. Proclamation 10947, Section 232 duties on steel, aluminum, and derivative products increased from 25% to 50% on June 4, 2025, with duties applying to the steel and aluminum content of derivative products. In the European Union, the Carbon Border Adjustment Mechanism entered its definitive phase on January 1, 2026. As a result, buyers increasingly prioritize suppliers capable of documenting steel content, country of origin, and embedded emissions.

Market constraints include volatile zinc and energy costs, limited regional galvanizing capacity, bath-size restrictions, permitting requirements, and long investment payback periods. Value engineering can also lead to galvanized specifications being replaced by pre-galvanized or painted steel without full lifecycle corrosion analysis. Procurement is further complicated by structural, electrical, and mechanical contractors purchasing galvanized components through separate packages and standards.

High-growth market opportunities

Repeated data hall designs create opportunities for pre-engineered containment and framing kits that are coated, bundled, and delivered by installation location. These systems reduce site cutting, improve installation efficiency, and support repeat orders across multi-phase campuses.

Suppliers using electric arc furnace steel can position lower-emission galvanized products against CBAM certificate costs. Fabricators that control their bill of materials can provide steel-content documentation that may reduce Section 232 duty exposure for importers. Factory-coated plinths, skid frames, pipe racks, and support structures for chiller yards and generator compounds also offer higher engineering value.

Segment outlook

  • Product form: Structural sections and plate are expected to hold the largest share in 2026 due to their use in frames, platforms, pipe racks, mezzanines, and equipment supports. Cable tray, ladder, and basket systems are projected to record the highest CAGR as high-density computing increases requirements for power, fiber, and liquid cooling infrastructure.
  • Galvanizing process: Continuous galvanizing leads the market in 2026, supported by coated sheet and coil demand for decking, enclosures, basket tray, and light framing. Batch galvanizing is expected to grow fastest because fabricated platforms, plinths, skid frames, and pipe racks require coating after fabrication.
  • Coating class: Standard coatings account for the largest share, reflecting extensive use in sheltered indoor environments. Heavy and extra-heavy coatings are projected to expand fastest due to outdoor exposure, longer design lives, heat cycling, salt, rain, and condensation associated with liquid cooling.
  • Application area: White space and electrical rooms lead in 2026 because of their dense containment, strut, enclosure, and floor-system requirements. External works and plant yards are forecast to grow fastest as heat rejection, on-site generation, fuel systems, and cooling infrastructure expand.
  • Procurement route: Fabricator-supplied products hold the largest share because many assemblies are fabricated before batch coating. Mill-direct procurement is expected to grow fastest as large campus programs seek verified emissions, origin, and steel-content data.
  • Data center type: Hyperscale facilities lead the market, supported by large phased campuses and standardized hall designs. Colocation facilities are projected to register the highest CAGR, driven by wholesale leasing, liquid cooling retrofits, higher rack densities, and reconfigurable containment requirements.

Regional market analysis

Asia-Pacific is expected to lead the global hot-dip galvanized steel for data centres market in 2026. The region benefits from substantial steelmaking and galvanizing capacity, strong data center development in China, Japan, India, Singapore, Malaysia, and South Korea, and access to local fabricators capable of producing and coating assemblies near project sites.

North America is projected to achieve the highest CAGR through 2036, supported by concentrated AI campus construction in the U.S., extensive outdoor plant requirements, and trade measures favoring domestically fabricated and coated steel. Europe is increasingly shaped by carbon intensity and emissions transparency, with CBAM influencing sourcing decisions across Ireland, the Nordic countries, the Netherlands, Germany, and Spain.

Competitive landscape

Competition spans integrated steelmakers, independent galvanizers and fabricators, and containment and support-system manufacturers. Supplier advantage increasingly depends on production capacity, bath size, logistics, product range, emissions reporting, steel-content verification, and origin documentation.

Companies profiled include ArcelorMittal S.A., Nippon Steel Corporation, POSCO Holdings Inc., China Baowu Steel Group Corporation Limited, Tata Steel Limited, JSW Steel Limited, Nucor Corporation, Steel Dynamics, Inc., Cleveland-Cliffs Inc., voestalpine AG, SSAB AB, Hyundai Steel Company, Atkore Inc., Legrand SA, nVent Electric plc, Eaton Corporation plc, Niedax Group, and OBO Bettermann Holding GmbH & Co. KG.

The report provides market forecasts, segment analysis, regional assessments, competitive benchmarking, company profiles, and evaluations of zinc pricing, energy exposure, galvanizing capacity, trade measures, and growth opportunities. Its findings support capacity planning, procurement, product development, market entry, and investment decisions for steel producers, galvanizers, fabricators, containment suppliers, contractors, and data center operators.

Key Topics Covered:

1. Introduction
1.1. Market Definition and Scope
1.2. Currency and Limitations
1.2.1. Currency
1.2.2. Limitations

2. Research Methodology
2.1. Research Process
2.2. Secondary Research
2.3. Primary Research
2.4. Market Sizing and Forecasting
2.5. Data Triangulation and Validation
2.6. Assumptions for the Study

3. Executive Summary
3.1. Overview
3.2. Market Analysis, by Product Form
3.3. Market Analysis, by Galvanizing Process
3.4. Market Analysis, by Coating Class
3.5. Market Analysis, by Application Area
3.6. Market Analysis, by Procurement Route
3.7. Market Analysis, by Data Centre Type
3.8. Market Analysis, by Geography
3.9. Competitive Analysis

4. Market Insights
4.1. Overview
4.2. Factors Affecting Market Growth
4.2.1. Drivers
4.2.2. Restraints
4.2.3. Opportunities
4.2.4. Challenges
4.3. Impact Analysis of Market Determinants
4.4. Regulatory and Trade Policy Analysis
4.4.1. EU Carbon Border Adjustment Mechanism (Regulation (EU) 2023/956)
4.4.2. U.S. Section 232 Measures and Proclamation 10947
4.4.3. Coating Standards (ISO 1461, ASTM A123, ASTM A153)
4.5. Pricing Analysis
4.5.1. Zinc Price Dynamics
4.5.2. Energy Cost Pass-Through in Galvanizing
4.6. Value Chain Analysis
4.7. Porter's Five Forces Analysis
4.8. Case Studies

5. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Product Form
5.1. Overview
5.2. Structural Sections & Plate
5.3. Cable Tray, Ladder & Basket Systems
5.4. Strut, Channel & Framing Systems
5.5. Roof Deck & Purlins
5.6. Floor Systems & Pedestals
5.7. Enclosures & Containment
5.8. Fasteners & Fittings

6. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Galvanizing Process
6.1. Overview
6.2. Continuous Hot-Dip Galvanizing
6.3. Batch Hot-Dip Galvanizing

7. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Coating Class
7.1. Overview
7.2. Standard Coating Class
7.3. Heavy & Extra-Heavy Coating Class

8. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Application Area
8.1. Overview
8.2. White Space & Electrical Rooms
8.3. Structural Frame & Envelope
8.4. External Works & Plant Yard

9. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Procurement Route
9.1. Overview
9.2. Fabricator-Supplied
9.3. Service Centre & Distributor
9.4. Mill-Direct

10. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Data Centre Type
10.1. Overview
10.2. Hyperscale
10.3. Colocation
10.4. Enterprise & Edge

11. Global Hot-dip Galvanized Steel for Data Centres Market Assessment, by Geography
11.1. Overview
11.2. North America
11.2.1. U.S.
11.2.2. Canada
11.3. Europe
11.3.1. Germany
11.3.2. U.K.
11.3.3. Ireland
11.3.4. Netherlands
11.3.5. Nordic Countries
11.3.6. Spain
11.3.7. France
11.3.8. Rest of Europe
11.4. Asia-Pacific
11.4.1. China
11.4.2. Japan
11.4.3. India
11.4.4. South Korea
11.4.5. Singapore
11.4.6. Malaysia
11.4.7. Australia
11.4.8. Rest of Asia-Pacific
11.5. Latin America
11.5.1. Brazil
11.5.2. Mexico
11.5.3. Rest of Latin America
11.6. Middle East & Africa
11.6.1. GCC Countries
11.6.2. South Africa
11.6.3. Rest of Middle East & Africa

12. Competition Analysis
12.1. Overview
12.2. Key Growth Strategies
12.3. Competitive Benchmarking
12.4. Competitive Dashboard
12.4.1. Industry Leaders
12.4.2. Market Differentiators
12.4.3. Vanguards
12.4.4. Emerging Companies
12.5. Market Share Analysis

13. Company Profiles
13.1. ArcelorMittal S.A.
13.2. Nippon Steel Corporation
13.3. POSCO Holdings Inc.
13.4. China Baowu Steel Group Corporation Limited
13.5. Tata Steel Limited
13.6. JSW Steel Limited
13.7. Nucor Corporation
13.8. Steel Dynamics, Inc.
13.9. Cleveland-Cliffs Inc.
13.10. voestalpine AG
13.11. SSAB AB
13.12. Hyundai Steel Company
13.13. Atkore Inc.
13.14. Legrand SA
13.15. nVent Electric plc
13.16. Eaton Corporation plc
13.17. Niedax Group
13.18. OBO Bettermann Holding GmbH & Co. KG

14. Appendix
14.1. Available Customization
14.2. Related Reports

List of Tables [260]
List of Figures [53]

For more information about this report visit https://www.researchandmarkets.com/r/ybynhb

About ResearchAndMarkets.com
ResearchAndMarkets.com is the world's leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends.

CONTACT: CONTACT: ResearchAndMarkets.com Laura Wood,Senior Press Manager press@researchandmarkets.com For E.S.T Office Hours Call 1-917-300-0470 For U.S./ CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call +353-1-416-8900